Log In Start studying!
StudySmarter - The all-in-one study app.
4.8 • +11k Ratings
More than 3 Million Downloads
Free
|
|

Coastal Erosion Landforms

Coastal Erosion Landforms

When you visit the coast, you might often see impressive rock features all along the coastline. These range from giant cliffs right where the land meets the sea to smaller pillars of rock, called stacks, sticking out of the water further away from the shoreline. These are types of coastal erosion landforms that essentially form due to different processes that slowly break away the rock. But there's more to it than that! Let's take a closer look at these erosional landforms and how they form, shall we?

Coastal erosion landforms process

Coastal landforms are features that are created along the coast due to different processes that occur. But you might be wondering, 'what are coastal erosion landforms?' Well, these are landforms that take place as a consequence of erosion. Erosion is the gradual breakdown of material; in this case, this is rock. Along our coastlines, erosion takes place, and different types of coastal erosion landforms are produced.

Remember to distinguish coastal erosional landforms from coastal depositional landforms. See our coastal depositional landforms page for information on coastal depositional landforms and how they form.

Firstly, we need to remember the main factors that can affect how coastal erosion landforms occur. These are destructive waves, rock type and rock structure.

Destructive waves are powerful waves that form due to strong winds created by storms.

Destructive waves

Within destructive waves, there are three main types of erosional processes that take place along our coastlines. These are abrasion, attrition and hydraulic action, and these all create different coastal erosion landforms. Below is a table explaining these.

Erosional processExplanation
Abrasion

Abrasion is when rocks are carried by ocean waves and crash into cliff faces on our coastlines. These loose rocks cause the rock on the cliff face to break away, leaving it smooth.

Attrition

When attrition occurs, rocks within the waves crash into one another, causing them to break down into smaller and more rounded rocks.

Hydraulic action

Hydraulic action is a process that occurs when waves hit the rock face, forcing air into cracks within the rock. The pressure builds within this small space, causing the rock to break apart and fall from the main rock face.

Table 1

Rock type and structure

The type of rock is another factor that can affect how coastal erosion landforms are formed. Soft rock is easier to wear down; therefore, erosion often takes place at a faster rate. On the other hand, hard rock is harder to wear down and will require more force and pressure to erode. This means that it typically takes longer for the hard rock to be eroded. As a result, a coastline containing both hard and soft rock will create different erosional landforms since erosion usually occurs at different rates depending on how resistant the rock is. This also means that the structure of the rock can influence how coastal erosion landforms are formed. For example, if a rock face has different layers of both hard and soft rock, the rate of erosion will vary within the rock face, depending on the rock's resistance to erosion.

An example of hard rock is granite. Granite can be found at Land's End, formed by the Cornubian batholith. An example of reasonably soft rock is limestone, which can be found along the Dorset coast.

In these locations, the granite (hard rock) found at Land's End is more resistant to erosion, and the limestone (soft rock) along the Dorset coast is less resistant to erosion. This means more erosion will likely occur on the soft rock.

Coastal erosion landform revision

Below is a diagram that shows how each of the three main coastal erosional processes (abrasion, attrition, and hydraulic power) take place within a destructive wave.

Coastal erosion landform features

Coastal erosional landforms come in many shapes and sizes, some of which you may have seen before. This is due to the combination of the rock type and erosional processes, such as abrasion, attrition and hydraulic action that take place within destructive waves. Along a coastline, all three main types of erosional processes will take place, and this means you can often find multiple different erosional landforms on the same coastline. These landforms are cliffs, wave cut platforms, headlands, bays, caves, arches, and stacks.

Coastal erosion landforms types

OK, time to actually examine the different coastal erosion landforms.

Cliffs

Now, I'm sure when you think of the coast, you'll typically picture giant cliffs. But how do these iconic coastal landforms actually form?

Coastal erosion landforms Cliffs along a coastline. StudySmarter.Fig. 1 - Cliffs along a coastline.

Well, cliffs are eroded at the cliff base by abrasion. The rocks within the ocean waves carve out a curve at the base of the cliff, called a wave cut notch. This eventually causes the cliff to collapse above the wave cut notch as it becomes unstable due to a lack of support at the base, leaving behind a steep cliff face. Over time, this leads to something called cliff retreat, which is a process where the cliff face slowly erodes further and further inland, parallel to the coast.

Wave cut platforms

Unlike cliffs, wave cut platforms are probably not a feature you will notice and point out during a trip to the coast. They actually occur as a consequence of cliffs forming. Wave cut platforms are wide areas of rock at the base of the cliff that slope towards the sea. As the cliff is eroded, retreating further inland, a wave cut platform forms below the cliff. Material breaks off the cliff because of erosion, and this material builds up at the base of the cliff, forming the wave cut platform. This wide area of rock is often quite rough because of abrasion that takes place. Wave cut platforms can also frequently be covered by the sea as rising sea levels occur.

Headlands and bays

When searching for the perfect spot to sit when visiting the coast, you'll more than likely choose a bay, rather than a headland. This is because headlands have sea on three of their sides, whereas bays have land on three of their sides, making them more sheltered. You can see this in the image below.

coastal erosion landforms Coastline, showing headlands and bays. StudySmarter.Fig. 2 - Coastline, showing headlands (rock jutting out to sea) and bays (curved sandy formations.)

Headlands and bays form next to one another. Headlands are tall areas of coast that stick out into the sea, this is because they are made of harder rock that is more resistant to erosion. As erosion takes place, the more resistant rock remains, to form a headland and the less resistant rock erodes, to create a bay. Bays are inlets within the rocky coastline that curve inland, found either side of headlands, they are composed of weaker, less resistant rock. This means that headlands and bays can form due to the rock type and structure within a coastline.

Caves

Something you might love to explore when you visit the coast, are caves. Caves actually form at headlands. Over time, through abrasion, waves erode into the sides of these headlands, carving out a cave. This can happen on either side of the headland, or even on both sides at the same time!

Arches

Arches are an extension of caves. After continual erosion of the cave, eventually, the water will erode entirely through the headland so that that water can flow completely through the arch from one side of the headland to the other.

Stacks

Ultimately, arches are weakened through continued erosion and eventually the top of the arch collapses. This creates stacks, which are pillars of rock stood out at sea, away from the headland.

Caves, arches, and stacks are an extension of erosional landforms from one another, that form due to continued erosion.

Coastal erosion landforms diagram

This is a diagram showing the various coastal erosion landforms along a coastline.

Notice how many different formations that can occur in one area! Have you ever seen any of them before?

Coastal Erosion Landforms - Key takeaways

  • Cliffs, wave cut platforms, headlands, bays caves, arches, and stacks are all different coastal erosional landforms.
  • Abrasion is a process that creates coastal erosion landforms through the movement of rock in waves crashing against rock faces. It creates cliff faces and wave cut platforms.
  • Attrition is another process that creates coastal erosion landforms due to rocks within waves crashing into one another and breaking each other down.
  • Hydraulic action is when waves force air into cracks within the rock face, causing the rock to break apart due to a build-up of high pressure. This is another process of creating coastal erosion landforms.
  • Hard rock creates headlands due to being more resistant to erosion, whereas soft rock creates bays because it is easier to erode.

Frequently Asked Questions about Coastal Erosion Landforms

The 4 types of coastal erosion landforms include:

1. Cliffs

2. Caves

3. Headlands

4. Bays

Cliffs, wave cut platforms, headlands, bays, caves, arches and stacks are all coastal landforms formed by erosion.

Coastal landforms are landforms that occur due to various processes, such as erosion and deposition.

Cliffs, wave cut platforms, caves, arches, stacks, headlands and bays are landforms associated with coastal erosion.

Final Coastal Erosion Landforms Quiz

Question

What are the three types of coastal erosion in destructive waves?

Show answer

Answer

Abrasion, attrition and hydraulic action.

Show question

Question

True or false: wave cut notches in cliffs form due to attrition.

Show answer

Answer

False. They form due to abrasion.

Show question

Question

Name all the different types of coastal erosional landforms.

Show answer

Answer

Cliffs, wave cut platforms, headlands, bays, caves, arches and stacks

Show question

Question

What are the two factors that can affect the formation of coastal erosion landforms?

Show answer

Answer

Destructive waves and rock type.

Show question

Question

True or false: hydraulic action is when waves force air into cracks in rock faces that eventually cause the rock to break apart due to a build up of pressure.

Show answer

Answer

True.

Show question

Question

What is a stack?

Show answer

Answer

A stack is a rocky outcrop found away from headlands at sea, formed due to continued erosional processes.

Show question

Question

What is the difference between wave cut notches and wave cut platforms?

Show answer

Answer

Wave cut notches from due to continued abrasion at the cliff base and lead to the collapse of the cliff above it. Wave cut platforms are the gently seaward sloping wide platforms left behind as a cliff retreats.

Show question

Question

What is abrasion?

Show answer

Answer

Abrasion is when rocks carried in destructive waves crash into rock faces, causing the rock faces to break away.

Show question

Question

Describe the process of cave formations.

Show answer

Answer

Caves form as abrasion takes place at the side of a headland, carving out a cave into the rock.

Show question

Question

What types of rock are more resistant to erosion?

Show answer

Answer

Hard rock.

Show question

Question

Which of the following rock type is considered a soft rock?

Show answer

Answer

Limestone

Show question

Question

What is attrition?

Show answer

Answer

Attrition is when rocks within a destructive wave hit against one another and break apart, becoming smaller and more rounded.

Show question

Question

Which coastal erosional landforms are inlets along the coastline which are quickly eroded because they are often composed of soft rock?

Show answer

Answer

Cliffs

Show question

Question

What is cliff retreat?

Show answer

Answer

Cliff retreat is where over time the cliff erodes further inland due to erosion. 

Show question

Question

Which statement best describes headlands?

Show answer

Answer

Headlands are rocky outcrops made of hard, resistant rock that stick out into the sea and are surrounded by water on three of their sides.

Show question

60%

of the users don't pass the Coastal Erosion Landforms quiz! Will you pass the quiz?

Start Quiz

Discover the right content for your subjects

No need to cheat if you have everything you need to succeed! Packed into one app!

Study Plan

Be perfectly prepared on time with an individual plan.

Quizzes

Test your knowledge with gamified quizzes.

Flashcards

Create and find flashcards in record time.

Notes

Create beautiful notes faster than ever before.

Study Sets

Have all your study materials in one place.

Documents

Upload unlimited documents and save them online.

Study Analytics

Identify your study strength and weaknesses.

Weekly Goals

Set individual study goals and earn points reaching them.

Smart Reminders

Stop procrastinating with our study reminders.

Rewards

Earn points, unlock badges and level up while studying.

Magic Marker

Create flashcards in notes completely automatically.

Smart Formatting

Create the most beautiful study materials using our templates.

Sign up to highlight and take notes. It’s 100% free.